Smoke-extraction flap SHEV Flap-M

SHEV-FLAP smoke extraction device, size M
with iSHEV- linear actuator with integrated electronic load cut-off

The smoke extraction element SHEV-FLAP is the ideal closure for openings in flat roofs. These are especially openings above elevator shafts, which are intended for natural ventilation and smoke extraction. It can also be used as a relief opening for pressure ventilation systems in stairwells. The SHEV-FLAP consists of a straight, 50 cm high thermally insulated upstand and an integrated, tested NRWG lamella element with attached weather protection lamella hood. During construction, special attention was paid to a clean thermal separation in terms of building physics. The element is available in various standard sizes as well as made to measure. This solution provides a weather-protected opening, which ensures smoke extraction independent of wind direction.

Technical data:
⦁ Geometric cross-section: 0.15 m²
⦁ Upstand internal dimensions: 540 x 540 mm
⦁ Low snow load stability of the camber - SL 10
⦁ No overhead glazing. Laminated safety glass (VSG) available upon request.

Technical data SHEV slit actuator PA-LSL-75/48:
⦁ Power supply: 24 V DC
⦁ Rated current: 1 A
⦁ Stroke: 48 mm
⦁ Force: 750 N
⦁ Housing: Aluminum EV1
⦁ Connection: SICO PLUG with included 6 x 0.5 mm² connection cable (3,000 mm length)
⦁ Configurable via SICO LINK
⦁ Operating cycle: 30% (ON: 3 Min. / OFF: 7 Min.)
⦁ Temperature range: -5°C to 75°C

Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: SHEV-FLAP-M
Item number: M2 1791
WEEE Reg. No.: DE 97535049