Slit actuator PA-LSA-75/200-S

Slit actuator PA-LSA-75/200-S
24 V DC / 1.1 A / 750 N / 200 mm stroke / Synchronous actuator / outwards opening

The slit actuator PA-LS is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.

The article includes the rear bracket, type K-L-UK-J | art.no. K2 1563, deployment angle, type AW-80-4-S / art.no. K2 1513 and matching flange / art.no. N-LS-4.2-01-1.

Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.1 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 750 N
Pulling force: 750 N
Nominal locking force: 1000 N
Stroke length: 200 mm
Running speed: 7.6 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection: SICO-PLUG (without connection cable / set)
Dimensions (LxWxH): 535 x 36 x 53 mm
Sound level: < 70 dB (A)
Weight: 1.90 kg

Options:
- Connecting cable/set
- Coating according to RAL or DB

Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: Slit actuator PA-LSA-50/200-S
Article number: M2 2471 S A
WEEE Reg. No.: DE 97535049