Slit actuator PA-LS-75/200-S
| Part number | M2 2471 S |
| Input voltage | 24 V DC |
| Nominal current | 1.1 |
| Running speed | 7.6 |
| IP code | IP54 |
| Switch on duration | 30 |
Linear actuator PA-LS-75/200-S
24 V DC / 1.1 A / 750 N / 200 mm stroke / Synchronous actuator
The slit actuator PA-LS is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.
incl. Rear bearing, Type HK-L and setting angle, Type AW-80-S
Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.1 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 750 N
Pulling force: 750 N
Nominal locking force: 1000 N
Stroke length: 200 mm
Running speed: 7.6 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection: SICO-PLUG (without connection cable / set)
Dimensions (LxWxH): 535 x 36 x 53 mm
Sound level: < 70 dB (A)
Weight: 1.90 kg
Options:
- Connecting cable/set
- Coating according to RAL or DB
Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: Linear actuator EA-L-75/200-S
Article number: M2 2471 S
WEEE Reg. No.: DE 97535049
| Matchcode | PA-LS-75/200-S |
| Article name | Schlitzantrieb PA-LS-75/200-S |
| Part number | M2 2471 S |
| Input voltage | 24 V DC |
| Nominal current | 1.1 |
| Input voltage range | - 15 % / + 15 % |
| Networked standby | 0.9 W (1 min) |
| Stroke | 181 |
| Push force | 750 |
| Pull force | 750 |
| Nominal locking force | 1000 |
| Cut-Off | integrierte elektronische Lastabschaltung |
| Running speed | 7.6 |
| IP code | IP54 |
| Switch on duration | 30 |
| Mounting way | attached |
| Weight | 1.9 |
| Housing | Durchgehendes Alu-Profilrohr, eloxiert E6/EV1 mit integrierter Aufnahme für flexibles Konsolensystem |
| Housing type | Aluminium |
| Colour | Auf Anfrage |
| Housing length | 535 |
| Housing height | 42 |
| Diameter | 36 |
| Appliance class | III |
| Connection cable | SICO PLUG Anschluss. Exklusive Anschlussleitung / -set. |
| Nominal working temperature | 20 |
| Environment temperature range | -5 °C - 75 °C |
| Brackets included | no |
| Customs tariff no | 84798997 |
User Manuals
 BA_PA-LS-50-100-xxx_EN_11 | Operating manual for PA-LS(A) |
| Supplementary sheet LF-L | Supplementary sheet linear guideway LF-L |
CAD Drawings
 CAD Drawing PA-LS-xx(A)-xx | CAD drawing for the slit actuator PA-LS(A) |
| CAD Drawing PA-LS-xx(A)-xx | CAD drawing for slit actuator PA-LS(A) |
Certificates
| Certificate actuators | CE Declaration of conformity for Folding arm², chain, linear and slit actuators |
| Certifictate UKCA_PA-L_PA-LS(A) | Declaration of conformity for linear and slit actuators PA-L-xx/xxx(-S), PA-LS(A)-xx/xxx(-S) |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
Other
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Videos
 Synch PA actuators by connection cable | To connect two synchro-capable PA actuators there is no SICO LINK software required. The parametrization of MASTER and SLAVE #1 can be done easly by C1 and C2 of the connection cable. |
| Synchronize several PA-actuators | To synchronize several PA actuators you require the SICO LINK software |
